Using the laser cutter,,

I really liked the laser Origami Video, and would like to do something like this so after you can put a stripe on to it and wear it like a necklace, still haver to figure out how to lift the acrylic so when i melt one of the sides, the jewelry have space to fall down.

heres a pic of the design made in processingScreen Shot 2014-11-08 at 1.49.23 PMAfter having a first design I went to illustrator to do the final document before to cut it in the lazor cutter, also printed to see the real size:

2014-11-12 19.00.23Screen Shot 2014-11-14 at 1.17.18

 

 

 

 

The snake (left drawing) didn’t show up nice after the laser cutter because the amount of edging in a small figure, so I decided to keep only the puma head.

2014-11-13 22.33.172014-11-13 23.23.48

 

 

 

 

 

Finally I use the acrylic bender

2014-11-13 22.55.392014-11-13 23.45.53

 

 

 

 

And add the metal so it can be an earring:
2014-11-13 23.56.42

 

 

3 Responses

  1. Like we talked about last night, you’ll most likely have to use the acrylic bender for this. I’m not sure where the bend goes. Let me know if you want to discuss it further.

Leave a Reply to Ben Light Cancel reply